Application Notes

Thermal protection and Color Kinetics luminaires

Thermal protection technology continuously monitors luminaires temperature, preventing overheating in extreme temperatures, preserving the luminaire and preventing failure.

Chuck Spaulding
Updated by Chuck Spaulding

Color Kinetics narrow beam angle (<5°) photometric testing overview

Released: 13 December 2017 This document describes why Type A goniometers were chosen to measure lumen output of narrow beam luminaires instead of Type C goniometers, in conflict with LM-79-08 standards.

Updated

Color Kinetics Lumen Maintenance Statement

Released: January 30, 2010 Color Kinetics products use LEDs from suppliers who measure and certify lumen maintenance of their LED devices and modules in accordance with the approved methods defined in IES LM-80-08. Color Kinet…

Chuck Spaulding
Updated by Chuck Spaulding

Dimming eW Powercore and eColor Powercore Luminaires

Released: April 2011 Abstract: eW Powercore and eColor Powercore luminaires are compatible only with certain ELV-type reverse-phase dimmers. This application note describes how to select a dimming so…

Chuck Spaulding
Updated by Chuck Spaulding

Color Kinetics Lighting Applications

Descriptions of lighting applications and links to Color Kinetics luminaires.

Chuck Spaulding
Updated by Chuck Spaulding

Connecting Multiple Controller Keypads to iPlayer 3 Serial Port

Released: 2008 Controller Keypad is a serial triggering device used to trigger shows stored on iPlayer 3. A maximum of four (4) Controller Keypads can be daisy‐chained in series and connected to a single iPlayer 3…

Updated

iPlayer 3 Firmware Update Procedure

Released: 2008 The iPlayer 3 firmware image is periodically updated to improve system performance and functionality. Visit the iPlayer 3 product page for the most recent firmware update. If your iPlayer 3 is not ru…

Updated

Cable Pinout information for RJ45 cables

Released: January 2005. See below for Color Kinetics cable pinout information for RJ45 to RJ45, RJ45 to XLR-5 and RL45 to XLR-3 connectors.

Chuck Spaulding
Updated by Chuck Spaulding

Vibration-prone environments and Color Kinetics products

Released: 13 October 2006 Introduction It is well documented that Color Kinetics fixtures are suited for vibration-prone environments. Virtually no electronic devices, however, are capable of withstanding accelerations exerte…

Updated

Ultraviolet and Infrared Emissions

Released: January 2005. Do your fixtures and lamps emit UV or IR radiation? Color Kinetics’ Solid State Lighting Products do not emit UV or IR radiation... The Visible Spectrum. The visible spectrum, the range of colors of…

Updated

LSE RS-232 Serial Protocol

Released: 2007 The LSE has an RS-232 serial port that allows for show selection and brightness control. Electrical The RS-232 serial port connection on LSE is a DB9M connector, labeled “IOIOI.” The pinout of the DB…

Updated

Synchronizing Multiple iPlayer 2s

Released: 10 June 2002 The iPlayer 2 has a built-in capability to interconnect with other iPlayer 2s to maintain both time and show selection synchronization. This application note describes how to use this capability. Ove…

Updated

Controlling an iPlayer 2 from a Lutron GRAFIK Eye System

Released: 13 December 2001 The Lutron GRAFIK Eye® 3000 and 4000 series control systems can provide limited control to the Color Kinetics iPlayer 2. This is done through the Lutron GRX-AV Contact Inter…

Updated

Controlling an iPlayer 2 from a Vantage Automation System

Released: 27 November 2001 The Color Kinetics iPlayer 2 can be easily interfaced to the Vantage Automation System ( www.vantagecontrols.com ) via an RS-232 serial connection. Through this interface the Vantage system can comma…

Updated

Controlling an iPlayer 2 from a Lutron Homeworks Interactive System

Released: 13 December 2001 The Color Kinetics iPlayer 2 can be easily interfaced to the Lutron (www.lutron.com) HomeWorks Interactive® (HWI) system via an RS-232 serial connection. Through this interface the HWI system can com…

Updated

iPlayer 2 RS-232 Serial Protocol

Released: 8 August 2001 The iPlayer 2 has an RS-232 serial port that allows for show selection and brightness control. The port is primarily intended for use by the Controller Keypad, but it can also be used by other extern…

Updated

Using the iPlayer 2 Expansion Port

Released: 29 October 2001 The iPlayer 2 has a 26-pin expansion port that allows dry contact switches to select between shows. This note explains how the expansion port is configured and how to use it properly. Expansion Port…

Updated

iW Translator RS-232 Serial Protocol

Released: 16 June 2005 One function of iW Translator is to interpret commands it receives on its RS-232 serial port and convert the commands into the appropriate signals on the Zone Control network. This function allows th…

Updated

eW™ MR Track Fixture Compatibility

Released 2007 The eW™ MR lamp has a form factor that differs slightly from a traditional MR16 and therefore, may not compatible with all track fixtures for standard MR16 lamps. This application note addresses fixt…

Updated

Custom Content Quick Start Guide - Luminous Textile

Besides using videos from our standard content portfolio it is also possible to upload your own dynamic video content with our Content Manager software. If you are creating content for Luminous Texti…

Updated

Graze Powercore Conduit Installation

Custom Configuration Graze Powercore Conduit luminaires have threaded openings on each end appropriate for junction box connections. The threaded openings accept 1/2 in NPT conduit and includes 1.8 m (6 ft) flying leads.

Chuck Spaulding
Updated by Chuck Spaulding

Contact